---

Змінити в 7.4.1 ISO 9506-2 рядок

— Значення 3 зарезервовано для подальшого визначення

ДОДАТОКG
(додатковий)

ПРИКЛАД ФАЙЛУ SCL

Наведений нижче текст є прикладом можливого SCL-файлу. Цей файл і його вміст не треба використовувати з будь-якою іншою метою, окрім як із навчальною, оскільки приклад може не від­повідати діючій схемі SCL. Реальні приклади SCL та схему див. в ІЕС 61850-6.

<?xml version='1.0" encoding="UTF-8^,?>

<SCL xmlns:xsi-'http://www.w3.org/2001/XMLSchema-instance" xm!ns="http://www.iec.ch/61850/2003/SCL" version="2007” revision="A"

xsi:schemaLocation="http://www.iec.ch/61850/2003/SCL SCLxsd">

«Header ld=”SCL Example T1-1" nameStructure=”IEDName" />

«Substation name="S12" desc=’Baden”>

«VoltageLevel пате="0Г>

«PowerTransformer name=*T1" type=”PTR">

«LNode lnlnst=’1" lnClass="PDIF" ldlnst="F1" iedName=“D1Q1BP2" />

«LNode lnlnst="1“ lnClass=''TCTR" ldlnst="C1" iedName="D1Q1SB1" />

«Transformerwinding name-'W1” type-'PTW">

«Terminal connectivityNode=’'S12/D1/Q1/L1"substationName=”S12“ voltageLevelName-'DT bayName=‘Q1" cNodeName=“H“ />

«/Transformerwinding»

«Transformerwinding name="W2" type="PTW">

«Terminal connectivityNode=”S12/E1/Q2/L3* substationName="S12" voltageLevelName="ET bayName="Q2" cNodeName="L3“ />

</TransformerWinding>

«/PowerTransformer»

«Voltage multiplier=T unit="V"»220«/Voltage>

«Bay name="Q1">

«LNode lnlnst='1" lnClass="PDIS" ldlnst="F1" iedName="D1Q1BP3" />

«ConductingEquipment name="IT type="CTR”>

«Terminal connectivityNode="S12/D1/Q1/H” substationName="S12" voltageLevelName="Dr bayName-'QI" cNodeName="Lr /»

«SubEquipment name="R" phase=“A''>

«LNode lnClass=”TCTR" iedName=''D1Q1BP2" ldlnst=”F1" lnlnst=’1' />

«/SubEquipment»

«SubEquipment name=”S" phase="B”>

«LNode lnClass="TCTR" iedName="D1Q1BP2” ldlnst=’F1" lnlnst="2" />

«/SubEquipment»

«SubEquipment name=T phase="C>

«LNode lnClass="TCTR ’ iedName="D1Q1BP2" ldlnst=^HF1" lnlnst="3” />

</SubEquipment>

«SubEquipment name-'IO" phase="N">

«LNode lnClass="TCTR' iedName="D1Q1BP2" ldlnst=^HF1" lnlnst="4“ />

</SubEquipment>

«/ConductingEquipment»

«ConnectivityNode name="L1" pathName="S12/D1/Q1/Lr l>

</Bay>

«/VoltageLevel»

«VoltageLevel name="E1">

«Voltage multiplier=’k" unit="V"»132«/Voltage>

«Вау name=“Q1">

«LNode lnlnst=“1" lnClass=“MMXU" ldfnst=*C1“ iedName=*ElQ1SB1" />

«LNode lnlnst="1" lnClass='PDIS" ldlnst="F1" />

«LNode lnlnst="1“ lnClass="PDIF” ldlnst="F 1" /»

«ConductingEquipment name-’QAI” type=”CBR"»

«LNode lnlnst="1" lnClass=”CSWI" ldlnst=”C1' iedName="E1Q1SB1" /»

«Terminal connectivityNode=”S12/El/Q1/L1" substationName="S12" voltageLevelName=”ET bayName=”Q1" cNodeName="L1" />

«Terminal connectivityNode="S12/E1/Q1/L2" substationName-'S12" voltageLevelName-'ЕГ bayName-'QI” cNodeName="L2" />

«/ConductingEquipment»

«ConductingEquipment name="QB1" type="DIS">

«LNode lnlnst="2" lnClass="CSWI’ ldlnst=”C1" iedName="E1Q1SB1" /»

«LNode lnlnst="1" lnClass=”CILO" ldlnst="C1" iedName="D1Q1SB4" /»

«Terminal connectivltyNode=“S12/E1/Q4/Br substationName=“S12" voltageLevelName="E1" bayName="Q4" cNodeName="Br />

«Terminal connectivityNode="S12/E1/Q1/L1" substationName="S12" voltageLevelName="E1“ bayName=“Q1“ cNodeName=“L1" l>

«/ConductingEquipment»

«ConductingEquipment name="U1’ type=*VTR"»

«Terminal connectivityNode=“S12/E1/Q1/L2" substationName="S12" voltageLevelName="E1" bayName="Q1" cNodeName="L2" />

«SubEquipment name=“A" phase="A">

«LNode lnClass="TVTR" iedName=“ElQlSBr ldlnst="C1” lnlnst="1’ desc="VT phase L1" />

</SubEquipment>

«/ConductingEquipment»

«ConductingEquipment name=“H" type="CTR”»

«Terminal connectivityNode=”S12/E1/Q1/L3" substationName=“S12“ voltageLevelName="ET bayName="Q1” cNodeName=“L3“ /»

«Terminal connectivityNode=“S12/E1/Q1/L2" substationName=”S12" voltageLevelName=“Er bayName="Q1“ cNodeName=”L2" /»

«/ConductingEquipment»

«ConnectivityNode name="L1" pathName=”S12/E1/Q1/L1" /»

«ConnectivityNode name="L2" pathName="S12/E1/Q1/L2" /»

«ConnectivityNode пате=^и13" pathName=”S12/E1/Q1/L3" />

«/Bay»

«Bay name="Q2“ desc="Turgi"»

«ConductingEquipment name="QA1" type="CBR"»

«LNode lnlnst="r lnClass="CSWr ldlnst-'СГ /»

«Terminal connectivityNode="S12/E1/Q2/L0“ substationName=”S12" voltageLevelName="E1" bayName=”Q2" cNodeName="LO“ /»

«Terminal connectivityNode="S12/E1/Q2/L1" substationName="S12" voltageLevelName=“Er bayName="Q2" cNodeName="Lr /»

«/ConductingEquipment»

«ConductingEquipment name="QB1" type="DIS“»

«LNode lnlnst=”2" lnClass="CSWI" ldlnst="C1"/>

«LNode lnlnst="2" lnClass="CILO" ldlnst="C1" iedName="D1Q1SB4" /»

«Terminal connectivityNode='^,S12/E1/Q4/B1" substationName=“S12" voltageLevelName="E1“ bayName="Q4" cNodeName=”B1" /»

«Terminal connectivityNode="Sl2/E1/Q2/L0" substationName="S12” voltageLevelName="E1" bayName="Q2" cNodeName="LO" />«/ConductingEquipment*

<ConductingEquipment name-'И" type="CTR”>

«Terminal connectivityNode=”S12/E1/Q2/L1" substationName="S12" voltageLevelName=”ET' bayName="Q2" cNodeName-'LT' />

«Terminal connectivityNode="S12/E1/Q2/L2" substationName="S12" voltageLevelName="E1" bayName="Q2" cNodeName="L2" />

«/ConductingEquipment*

«ConductingEquipment пате-'UT' type="VTR">

«Terminal connectivityNode="S12/E1/Q2/LT' substationName-'S12" voltageLevelName-'ЕГ bayName="Q2" cNodeName-'LT />

«/ConductingEquipment*

«ConnectivityNode name=''L0" pathName="S12/E1/Q2/L0"/*

«ConnectivityNode name="L1" pathName="S12/E1/Q2/L1" /*

«ConnectivityNode name="L2" pathName=''S12/E1/Q2/L2" />

«/Bay>

«Bay name="Q3” desc=”London">

«LNode lnlnst="1" lnClass="MMXU" ldlnst="LDO" />

«LNode lnlnst='T InClass-'PDIS" ldlnst=”LDO" />

«LNode lnlnst="1” InClass-'PDIF" idlnst=”LDO" />

«ConductingEquipment name=”QA1" type="CBR">

«LNode lnlnst=”1" lnClass="CSWI" ldlnst='C1’ /*

«Terminal connectivityNode="S12/E1/Q3/L1" substationName="S12" voltageLevelName="E1" bayName="Q3" cNodeName=”L1" />

«Terminal connectivityNode="S12/E1/Q3/L2” substationName="S12" voltageLevelName="E1" bayName="Q3" cNodeName=“L2" />

«/ConductingEquipment*

«ConductingEquipment name="QB1" type="DIS"*

«Terminal connectivityNode=”S12/E1/Q4/B1" substationName=”S12" voltageLevelName="E1'' bayName="Q4" cNodeName=”B1" />

«Terminal connectivityNode=“S12/E1/Q3/L1” substationName=''S12" voltageLevelName="E1" bayName="Q3¹' cNodeName-'Ll" /*

«/ConductingEquipment*

«ConductingEquipment name="U1" type-'VTR"*

«Terminal connectivityNode=''S12/E1/Q3/L2" substationName-'S12" voltageLevelName-'ЕГ bayName=''Q3" cNodeName="L2" />

«/ConductingEquipment*

«ConductingEquipment name="H” type="CTR”>

«Terminal connectivityNode="S12/E1/Q3/L3" substationName="S12" voltageLevelName=”E1" bayName=”Q3” cNodeName=''L3" />

«Terminal connectivityNode="S12/E1/Q3/L2" substationName="S12" voltageLevelName-'ЕГ bayName="Q3” cNodeName="L2" />

«/ConductingEquipment*

«ConnectivityNode name="L1" pathName-'S12/E1/Q3/Lr />

«ConnectivityNode name="L2" pathName="S12/E1/Q3/L2“/>

«ConnectivityNode name=''L3" pathName="S12/E1/Q3/L3" /*

«/Bay*

«Bay name="Q4''*

«ConnectivityNode name=''B1" pathName="S12/E1/Q4/B1" /*

«/Bay*

«/VoltageLevel*«/Substation*

«Communication*

«SubNetwork name="W01" type="8-MMS">

<Text>Station bus«/Text>

«BitRate unit="b/s''*10</BitRate>

«ConnectedAP iedName="D1Q1SB4" apName="S1"*

«Address*

<P type="IP” xsi:type=”tP_IP''*10.0.0.11</P>

<P type="IP-SUBNET" xsi:type="tP_IP-SUBNET"*255.255.255.0«/P*

• P type="IP-GATEWAY'' xsi:type="tP_IP-GATEWAY"> 10.0.0.101 </P>

• P type="OSI-AP-Title" xsi:type="tP_OSI-AP-Title"*1,3,9999,23</P>

• P type=''OSI-AE-Qualifier” xsi:type="tP_OSI-AE-Qualifier"*23«/P>

• P type="OSI-TSEL” xsi:type="tP_OSI-TSEL"*OOOOOOOK/P>

• P type="OSI-PSEL" xsi:type=''tP_OSI-PSEL"*01«/P>

• P type="OSI-SSEL" xsi:type="tP_OSI-SSEL”*01«/P>

«/Address*

<GSE ldlnst="CT cbName="SyckResult"*

«Address*

• P type="MAC-Address" xsi:type="tP_MAC-Address"*01-0C-CD-01-00-02</P>

• P type="APPID” xsi:type="tP_APPID"*3001«/P>

• P type="VLAN-PRIORITY" xsi:type="tP_VLAN-PRIORITY"*4«/P>

<P type="VLAN-ID" xsi:type=”tP_VLAN-ID">001 «/P*

«/Address*

</GSE>

«PhysConn type=”Plug">

<P type=”Type">FOC</P>

<P type="Plug"*ST«/P>

«/PhysConn*

«/ConnectedAP*

«ConnectedAP iedName="E1Q1SBr apName="S1">

«Address*

<P type="IP"*10.0.0.1«/P>

<P type="IP-SUBNET">255.255.255.0</P>

<P type="IP-GATEWAY"*10.0.0.101«/P>

<P type="OSI-TSEL"*00000001</P*

<P type="OSI-PSEL">01 </P*

«Р type="OSI-SSEL">01 </P>

«/Address*

<GSE ldlnst="C1" cbName=''ltlPositions">

«Address*<Р type=”MAC-Address">01-0C-CD-01 -00-01 </Р>

<Р type="APPID">3000</P>

<Р type="VLAN-PRIORITY">4</P>

</Address>

</GSE>

<SMV ldlnst="C1" cbName="Volt">

<Address>

<P type="MAC-Address”>01-0C-CD-04-00-01 </P>

<P type=”APPID">4000</P>

<P type="VLAN-ID">123</P>

<P type="VLAN-PRIORITY">4</P>

</Address>

</SMV>

</ConnectedAP>

<ConnectedAP iedName="E1Q1BP2" apName="S1">

<Address>

<P type="IP">10.0.0.2</P>

<P type="IP-SUBNET">255.255.255.0</P>

<P type=”lP-GATEWAY"> 10.0.0.101 </P>

<P type="OSI-TSEL">00000001 </P>

<P type="OSI-PSEL”>01 </P>

<P type="OSI-SSEL">01</P>

</Address>

</ConnectedAP>

<ConnectedAP iedName=''E1Q1BP3" apName=’’S1">

<Address>

<P type="IP”>10.0.0.3</P>

<P type=”IP-SUBNET">255.255.255.0</P>

<P type="lP-GATEWAY"> 10.0.0.101 </P>

<P type="OSI-TSEL">00000001 </P>

<P type="OSI-PSEL">01 </P>

<P type="OSI-SSEL”>01 </P>

</Address>

</ConnectedAP>

<ConnectedAP iedName="A1KA1" apName="S1">

<!- station level client for reporting -->

<Address>

<P type="IP">10.0.0.121</P>

<P type=''IP-SUBNET^,'>255.255.255.0</P>

<P type="IP-GATEWAY">10.0.0.101 </P><Р type="OSI-TSEL">00000001 «/Р>

«Р type="OSI-PSEL"*01 </Р>

<Р type=“OSI-SSEL''>01 </Р>

</Address>

«/ConnectedAP*

«/SubNetwork*

«/Communication*

<IED name="E1Q1SB1">

«Services*

«DynAssociation />

«GetDirectory />

«GetDataObjectDefinition /*

«GetDataSetValue />

«DataSetDirectory />

«ReadWrite />

«FileHandling />

«ConfDataSet max="4’ maxAttributes="50" l>

«ConfReportControl max="12" />

«Reportsettings bufTime="Dyn" cbName="Conr rptlD="Dyn" datSet="Conf" intgPd="Dyn" optFields="Conf" /> «ConfLogControl max="1" /*

«ConfLNs fixLnlnst=”true" />

«GetCBValues /*

«GOOSE max="2” />

«GSESettings applD="Conf cbName=”Conf" datSet="Conf" />

«/Services*

«AccessPoint name="ST>

«Server*

«Authentication />

«LDevice inst="C1">

<LN0 lnType="LN0“ )nClass="LLN0" inst="">

«DataSet name="Positions">

«FCDA ldlnst="C1" prefix⁵”" lninst⁵”1” lnClass="CSWI" doName="Pos" fc="ST" /*

«FCDA ldlnst=”C1" prefix⁵"" lnlnst="2" lnClass="CSWI” doName="Pos" fc="ST" /*

«/DataSet*

«DataSet name=”Measurands">

«FCDA ldlnst=”Cr prefix⁵"" lnlnst="r lnClass="MMXU" doName="Amps" fc="MX" />

«FCDA ldlnst="Cr prefix⁵”¹* lnlnst="1“ lnClass=”MMXU" doName="Volts'' fc="MX" />

«/DataSet*

«DataSet name='smv">

«FCDA ldlnst=“C1” prefix⁵"" lnClass⁵"TVTR” lnlnst="1" doName="Vol” daName=“instMag" fc="MX" /></DataSet>

<ReportControl name="PosReport" rptlD="E1Q1Switches" datSet-'Positions” confRev=”0">

<TrgOps dchg="true" qchg="true" />

<OptFields />

<RptEnabled max=“5">

<ClientLN iedName=''A1KA1" ldlnst="LD1" lnlnst="1" lnClass="IHMI" />

</RptEnabled>

</ReportControl>

<ReportControl name-'MeaReport" rptlD="E1Q1Measurands" datSet=”Measurands" intgPd="2000" confRev="0">

<TrgOps qchg="true" period=”true" />

<OptFields reasonCode="true” />

<RptEnabled max="5’’>

<ClientLN iedName="A1KA1" ldlnst="LD1" lnlnst="1" lnClass="IHMI" />

</RptEnabled>

</ReportControl>

<LogControl name=''Log” datSet="Positions” logName="C1">

<TrgOps dchg=''true" qchg="true" />

</LogControl>

<Log/>

<GSEGontrol name=''ltlPositions" datSet="Positions" applD=''ltl" />

<SampledValueControl name="Volt" datSet=”smv" smvlD=''ir smpRate="4800" nofASDU="5" multicast="true">

<SmvOpts sampleRate="true" refreshTime-'true” sampleSynchronized="true" />

</SampledValueGontrol>

</LN0>

<LN lnType=”LPHDa" lnClass=”LPHD" inst="1">

<DOI name="Proxy”>

<DAI name="stVal">

<Val>false</Val>

</DAI>

</DOI>

</LN>

• LN lnst="1” lnClass="CSWr lnType="CSWIa" />

• LN inst="2" lnClass=''CSWI" lnType=”CSWla" />

• LN inst="3“ lnClass="CSWI" lnType=°CSWIb" />

• LN inst="1" lnClass="MMXU" lnType=''MMXUa">

<DOI name="Volts“>

<SDI name="sVC”>

<DAI name=''offset">

<Val>10</Val>

</DAI><DAI name="scaleFactor">

<Val>200</Val>

</DAI>

</SDI>

</DOI>

</LN>

<LN InType-'TVTRa" lnClass=''TVTR" inst="1" />

</LDevice>

</Server>

</AccessPoint>

</IED>

<!- Details of following lEDs to be defined before final allocation of LNs to Substation section -->

<IED name="E1Q1BP2">

<AccessPoint name="S1“ />

</IED>

<IED name="E1Q1BP3">

<AccessPoint name=”S1" />

</IED>

<IED name="E1Q2SB1“>

<AccessPoint name="S1" />

</IED>

<IED name="E1Q3SB1">

<AccessPoint name="S1" />

</IED>

<IED name="E1Q3KA1">

<AccessPoint name="S1" />

</IED>

<IED name="E1Q3KA2">

<AccessPoint name="S1” />

</IED>

<IED name="E1Q3KA3">

<AccessPoint name="S1“ />

</IED>

<IED name="D1Q1SB1">

<AccessPoint name="S1" />

</IED>

<IED name="D1Q1BP2”>

<AccessPoint name="S1" />

</IED>

<IED name="D1Q1BP3"><AccessPoint name="S1" />

</IED>

<IED name=”D1Q1SB4">

«Services>

<DynAssociation />

<GetDirectory />

«GetDataObjectDefinition />

«GetDataSetValue />

<DataSetDirectory />

<ReadWrite />

<FileHandling />

«ConfDataSet max=”4" />

«ConfReportControl max=”12"/>

«Reportsettings bufTime="Dyn" cbName="Conf' rptlD="Dyn" datSet="Conf" intgPd="Dyn" optFields="Conf" />

<ConfLogControl max='T' />

<GetCBValues />

«GOOSE max="2" />

<GSESettings applD="Conf" cbName="Conf" datSet=”Conf'/>

</Services>

<AccessPoint name="Sr’>

<Server>

«Authentication />

«LDevice inst="C1">

<LN0 lnType="LN0” lnClass="LLN0" inst="">

«DataSet name=”SyckResult">

<FCDA ldlnst=''CT prefix='"' lnlnst="1" lnClass="RSYN" doName="Rel" fc="ST" />

</DataSet>

«GSEControl name=”SyckResult“ datSet="SyckResult" applD="SynChk" />

</LN0>

• LN lnType="LPHDa" lnClass="LPHD" inst="1">

<DOI name="Proxyⁿ>

<DAI name^=,,stVal">

<Val>false«/Val>

</DAI>

</DOI>

</LN>

• LN inst="1" lnClass="RSYN" lnType="RSYNa" />

• LN inst="1" lnClass="CILO" lnType="CILOa" />

• LN inst="2" lnClass="CILO'' lnType=''CIL0a" />

</LDevice></Server>

</AccessPoint>

</IED>

<IED name="A1 KA1">

<!— station level IED - client only ->

<AccessPoint name="Sr>

<LN inst="1" lnClass="IHMI" lnType=“IHMIa" />

</AccessPoint>

</IED>

<DataTypeTemplates>

«LNodeType id="LN0" lnClass="LLN0">

<DO name="Mod" type="myMod'' />

<DO name="Beh" type="myBeh” />

<DO name="Health" type=”myHealth" />

<DO name="NamPlt” type="myLN0LPL" />

</LNodeType>

<LNodeType id="LPHDa“ lnClass="LPHD">

<DO name="PhyNam" type="myDPL" l>

<DO name="PhyHealth" type="myENS" />

<DO name="Proxy" type="mySPS" />

</LNodeType>

<LNodeType id="CSWIa" lnClass=''CSWI">

<DO name="Mod" type="myMod” />

<DO name="Beh” type="myBeh" />

<DO name="Health" type="myHealth" />

<DO name="NamPlt" type="myLPL" />

<DO name="Pos" type=''myPosWithoutTimeActivation" />

</LNodeType>

<LNodeType id="CSWIb" lnClass=”CSWI">

<DO name="Mod" type="myMod" l>

<DO name="Beh" type="myBeh” l>

<DO name="Health" type="myHealth" />

<DO name="NamPlt” type="myLPL" />

<00 name="Pos" type="myPosWithTimeActivation" />

</LNodeType>

<LNodeType id="MMXUa” lnClass="MMXU">

<DO name="Mod” type="myMod" />

<DO name=”Beh“ type="myHealth" />

<DO name=“Health" type=''myBeh" />

<DO name="NamPlt" type=“myLPL" /><00 name=”Amps" type="myMV" />

<DO name="Volts" type="myMV" />

</LNodeType>

<LNodeType id="CILOa" lnClass="CILO">

• 00 name=''Mod" type=“myHealth'' />

• D0 name="Beh" type="myBeh" />

• D0 name="Health” type="myENS" />

• D0 name="NamPlt” type="myLPL" />

<00 name=”EnaOpen'' type=”mySPS" l>

<DO name="EnaClose" type="mySPS" />

</LNodeType>

<LNodeType id=”TVTRa" lnClass="TVTR">

<D0 name="Mod" type="myMod" />

<DO name=”Beh” type="myBeh" l>

<DO name=”Health" type="myHealth" />

<D0 name="NamPlt" type="myLPL" />

<D0 name="Vor type=”mySAV" />

<DO name="FuFail" type="mySPS" />

</LNodeType>

<LNodeType id="RSYNa" lnClass=”RSYN''>

<DO name=''Mod" type="myMod" />

<DO name="Beh" type=“myBeh" />

<DO name="Health" type="myHealth" />

<DO name="NamPlt" type="myLPL'' />

<DO name=”Rel" type="mySPS" />

</LNodeType>

<LNodeType id=”IHMIa" lnClass="IHMI">

<DO name="Mod” type="myMod" l>

<DO name=”Beh^H type="myBeh” />

<DO name="Health“ type="myHealth" />

<D0 name=“NamPlt" type="myLPL" />

</LNodeType>

<DOType id-'myMod" cdc="ENC">

<DA name="stVal" fc=”ST" dchg="true" bType=“Enum" type="Mod" />

<DA name-'q” fc=^,'ST" bType="Quality" qchg=''true" />

<DA name="t" fc="ST" bType="Timestamp" dchg=“true" />

<DA name="ctlModel" fc=”CF" bType="Enum" type=”ctlModel" />

<DA name="Oper" fc=”CO" bType="Struct" type="myModOper" />

<!- Oper needed for mapping according to 8-1 -->

</DOType><DOType id="myHealth" cdc=”ENS''>

<DA name="stVal" fc="ST" bType="Enum" dchg=''true" type="Health" />

<DA name=''q" fc="ST" bType="Quality" qchg=“true" />

<DA name="t" fc=“ST" bType='^,Timestamp" dchg=”true" />

</DOType>

<DOType id="myBeh" cdc="ENS”>

<DA name="stVal" fc="ST" bType=’’Enum" dchg="true" type=”Beh" />

<DA name="q" fc="ST" bType="Quality" qchg="true" />

<DA name="t" fc=“ST" bType=''Timestamp" dchg="true" />

</DOType>

<DOType id="myENS" cdc="ENS">

<DA name=“stVal" fc="ST" bType="INT32" dchg="true" />

<DA name="q" fc="ST" bType="Quality" qchg="true" />