ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)
Наказ від 24.02.2016 № 52
EN 15004-4:2008
Fixed firefighting systems - Gas extinguishing systems -
Part 4: Physical properties and system design of gas extinguishing
systems for HFC 125 extinguishant
прийнято як національний стандарт
методом «підтвердження» за позначенням
ДСТУ EN 15004-4:2015
(EN 15004-4:2008, IDT)
СТАЦІОНАРНІ СИСТЕМИ ПОЖЕЖОГАСІННЯ
Системи газового пожежогасіння.
Частина 4. Вогнегасна речовина HFC 125
Копію цього стандарту можна отримати
у Національному фонді нормативних документів
З наданням чинності від 2016-01-01E
EN 15004-4
June 2008
UROPEAN STANDARDNORME EUROPEENNE
EUROPAISCHE NORM
ICS 13.220.20
English Version
Fixed firefighting systems - Gas extinguishing systems - Part 4:
Physical properties and system design of gas extinguishing
systems for HFC 125 extinguishant (ISO 14520-8:2006,
modified)
Installations fixes de lutte contre I'incendie - Installations
d'extinction a gaz - Partie 4 : Proprietes physiques et
conception des systemes pour agent extincteur HFC 125
(ISO 14520-8:2006, modifiee)
Ortsfeste Brandbekampfungsanlagen - Loschanlagen mit
gasformigen Loschmitteln - Tell 4: Physikalische
Eigenschaften und Anlagenauslegung fiir Feuerldschmittel
HFC 125 (ISO 14520-8:2006, modifiziert)
This European Standard was approved by CEN on 26 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
СОМІТЁ EUROPEEN DE NORMALISATION
EUROPAISCHES KOMITEE FUR NORMUNG
M
Ref. No. EN 15004-4:2008: E
anagement Centre: rue de Stassart, 36 B-1050 Brussels© 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members
.Contents Page
Foreword 3
Foreword of ISO 14520-8:2006 5
Scope 6
Normative references 6
Terms and definitions 6
Characteristics and uses 6
General 6
Use of HFC 125 systems 7
Safety of personnel 9
System design 10
Fill density 10
Superpressurization 11
Extinguishant quantity 11Foreword
This document (EN 15004-4:2008) has been prepared by Technical Committee CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2008, and conflicting national standards shall be withdrawn at the latest by December 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
The text of the International Standard ISO 14520-8:2006 from Technical Committee ISO/TC 21 "Equipment for fire protection and fire fighting" of the International Organization for Standardization (ISO) has been taken over as a European Standard by Technical Committee CEN/TC 191 "Fixed firefighting systems", the secretariat of which is held by BSI, with common modifications which are indicated by a straight line in the margin of the text.
This European Standard will consist of the following parts, under the general title Fixed firefighting systems - Gas extinguishing systems:
— Part 1: Design, installation and maintenance (ISO 14520-1, modified)
Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant (ISO 14520-5, modified)
Part 3: Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant (ISO 14520-6, modified)
Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant (ISO 14520-8, modified)
Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant (ISO 14520-9, modified)
Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant (ISO 14520-10, modified)
Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12, modified)
Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13, modified)
Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14, modified)
Part 10: Physical properties and system design of gas extinguishing systems for IG-541 extinguishant (ISO 14520-15, modified)
The International Standards ISO 14520-2 and ISO 14520-11, which dealt with CF3I and HFC 236fa extinguishants, respectively, have not been implemented by CEN, as CF3I extinguishant is only valid for local application and HFC 236fa extinguishant is only applicable for portable fire extinguishers and local application, respectively, which is not covered by the scope.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.Foreword of ISO 14520-8:2006
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14520-8 was prepared by Technical Committee ISO/TC 21, Equipment for fire protection and fire fighting, Subcommittee SC 8, Gaseous media and firefighting systems using gas.
This second edition cancels and replaces the first edition (ISO 14520-8:2000), which has been technically revised.
ISO 14520 consists of the following parts, under the general title Gaseous media fire extinguishing systems — Physical properties and system design-.
Part 1: General requirements
Part 2: CF3I extinguishant
Part 5: FK-5-1-12 extinguishant
Part 6: HCFC Blend A extinguishant
Part 8: HFC 125 extinguishant
Part 9: HFC 227ea extinguishant
Part 10: HFC 23 extinguishant
Part 11: HFC 236fa extinguishant
Part 12IG-01 extinguishant
Part 13: IG-100 extinguishant
Part 14: IG-55 extinguishant
Part 15: IG-541 extinguishant
Parts 3, 4 and 7, which dealt with FC-2-1-8, FC-3-1-10 and HCFC 124 extinguishants, respectively, have been withdrawn, as these types are no longer manufactured.
Scope
This document gives specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 125 extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at nominal pressures of 25 bar and 42 bar, superpressurized with nitrogen. This does not preclude the use of other systems.
Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 15004-1:2008, Fixed firefighting systems - Gas extinguishing systems - Design, installation and maintenance (ISO 14520-1, modified)
Terms and definitions
For the purposes of this document, the terms and definitions given in EN 15004-1:2008 apply.
Characteristics and uses
General
Extinguishant HFC 125 shall comply with the specification according to Table 1.
HFC 125 is a colourless, almost odourless, electrically non-conductive gas with a density approximately four times that of air.
The physical properties are given in Table 2.
HFC 125 extinguishes fires mainly by physical means, but also by some chemical means.
Table 1 — Specification for HFC 125
|
Property |
Requirement |
|
Purity |
99,6 % by mass, min. |
|
Acidity |
3 x 10~* by mass, max. |
|
Water content |
10 x 10-4 % by mass, max. |
|
Non-volatile residue |
0,01 % by mass, max. |
|
Suspended matter or sediment |
None visible |
Table 2 — Physical properties of HFC 125
|
Property |
Unit |
Value |
|
Molecular mass |
— |
120,02 |
|
Boiling point at 1,013 bar (absolute) |
°С |
-48,09 |
|
Freezing point |
°С |
- 101 |
|
Critical temperature |
°С |
66,02 |
|
Critical pressure |
bar abs a |
36,18 |
|
Critical volume |
cm3/mol |
210 |
|
Critical density |
kg/m3 |
573,6 |
|
Vapour pressure 20 °С |
bar abs a |
12,05 |
|
Liquid density 20 °С |
kg/m3 |
1 218,0 |
|
Saturated vapour density 20 °С |
kg/m3 |
77,97 |
|
Specific volume of superheated vapour at 1,013 bar and 20 °С |
m3/kg |
0,1972 |
|
Chemical formula |
CF3CHF2 |
|
|
Chemical name |
Pentafluoroethane |
|
|
a 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2. |
||
Use of HFC 125 systems
HFC 125 total flooding systems may be used for extinguishing fires of all classes within the limits specified in EN 15004-1:2008, Clause 4.
The extinguishant requirements per volume of protected space are given in Table 3 for various levels of concentration. These are based on methods given in EN 15004-1:2008, 7.6.
The extinguishing concentrations and design concentrations for п-heptane and Surface Class A hazards are given in Table 4.
Table 3 — HFC 125 total flooding quantity
|
Temperature T °С |
Specific vapour volume 5 m3/kg |
HCFC 125 mass requirements per unit volume of protected space, mlv (kg/m3) This information refers only to the product HFC-125, and does not represent any other products containing pentafluoroethane as a component. |
||||||||||||||||||
|
7 % |
8 % |
9 % |
Desigi 10 % |
concentration (by volume) |
14 % |
15 % |
16 % |
|||||||||||||
|
11 % |
12 % |
13% |
||||||||||||||||||
|
-45 |
0,1497 |
0,5028 |
0,5809 |
0,6607 |
0,7422 |
0,8256 |
0,9109 |
0,9982 |
1,0874 |
1,1788 |
1,2724 |
|||||||||
|
-40 |
0,1534 |
0,4907 |
0,5669 |
0,6447 |
0,7243 |
0,8057 |
0,8889 |
0,9741 |
1,0612 |
1,1504 |
1,2417 |
|||||||||
|
-35 |
0,1572 |
0,4788 |
0,5532 |
0,6291 |
0,7068 |
0,7862 |
0,8675 |
0,9505 |
1,0356 |
1,1226 |
1,2117 |
|||||||||
|
-30 |
0,1608 |
0,4681 |
0,5408 |
0,6151 |
0,6910 |
0,7686 |
0,8480 |
0,9293 |
1,0124 |
1,0975 |
1,1846 |
|||||||||
|
-25 |
0,1645 |
0,4576 |
0,5286 |
0,6012 |
0,6754 |
0,7513 |
0,8290 |
0,9084 |
0,9896 |
1,0728 |
1,1579 |
|||||||||
|
-20 |
0,1682 |
0,4475 |
0,5170 |
0,5880 |
0,6606 |
0,7348 |
0,8107 |
0,8884 |
0,9678 |
1,0492 |
1,1324 |
|||||||||
|
-15 |
0,1719 |
0,4379 |
0,5059 |
0,5753 |
0,6464 |
0,7190 |
0,7933 |
0,8693 |
0,9470 |
1,0266 |
1,1081 |
|||||||||
|
-10 |
0,1755 |
0,4289 |
0,4955 |
0,5635 |
0,6331 |
0,7042 |
0,7770 |
0,8514 |
0,9276 |
1,0055 |
1,0853 |
|||||||||
|
-5 |
0,1791 |
0,4203 |
0,4855 |
0,5522 |
0,6204 |
0,6901 |
0,7614 |
0,8343 |
0,9089 |
0,9853 |
1,0635 |
|||||||||
|
0 |
0,1828 |
0,4118 |
0,4757 |
0,5410 |
0,6078 |
0,6761 |
0,7460 |
0,8174 |
0,8905 |
0,9654 |
1,0420 |
|||||||||
|
5 |
0,1864 |
0,4038 |
0,4665 |
0,5306 |
0,5961 |
0,6631 |
0,7316 |
0,8016 |
0,8733 |
0,9467 |
1,0219 |
|||||||||
|
10 |
0,1900 |
0,3962 |
0,4577 |
0,5205 |
0,5848 |
0,6505 |
0,7177 |
0,7864 |
0,8568 |
0,9288 |
1,0025 |
|||||||||
|
15 |
0,1935 |
0,3890 |
0,4494 |
0,5111 |
0,5742 |
0,6387 |
0,7047 |
0,7722 |
0,8413 |
0,9120 |
0,9844 |
|||||||||
|
20 |
0,1971 |
0,3819 |
0,4412 |
0,5018 |
0,5637 |
0,6271 |
0,6919 |
0,7581 |
0,8259 |
0,8953 |
0,9664 |
|||||||||
|
25 |
0,2007 |
0,3750 |
0,4333 |
0,4928 |
0,5536 |
0,6158 |
0,6794 |
0,7445 |
0,8111 |
0,8793 |
0,9491 |
|||||||||
|
30 |
0,2042 |
0,3686 |
0,4258 |
0,4843 |
0,5441 |
0,6053 |
0,6678 |
0,7318 |
0,7972 |
0,8642 |
0,9328 |
|||||||||
|
35 |
0,2078 |
0,3622 |
0,4185 |
0,4759 |
0,5347 |
0,5948 |
0,6562 |
0,7191 |
0,7834 |
0,8492 |
0,9166 |
|||||||||
|
40 |
0,2113 |
0,3562 |
0,4115 |
0,4681 |
0,5258 |
0,5849 |
0,6454 |
0,7072 |
0,7704 |
0,8352 |
0,9014 |
|||||||||
|
45 |
0,2149 |
0,3503 |
0,4046 |
0,4602 |
0,5170 |
0,5751 |
0,6345 |
0,6953 |
0,7575 |
0,8212 |
0,8863 |
|||||||||
|
50 |
0,2184 |
0,3446 |
0,3982 |
0,4528 |
0,5088 |
0,5659 |
0,6244 |
0,6842 |
0,7454 |
0,8080 |
0,8721 |
|||||||||
|
55 |
0,2219 |
0,3392 |
0,3919 |
0,4457 |
0,5007 |
0,5570 |
0,6145 |
0,6734 |
0,7336 |
0,7953 |
0,8584 |
|||||||||
|
60 |
0,2254 |
0,3339 |
0,3858 |
0,4388 |
0,4930 |
0,5483 |
0,6050 |
0,6629 |
0,7222 |
0,7829 |
0,8451 |
|||||||||
|
65 |
0,2289 |
0,3288 |
0,3799 |
0,4321 |
0,4854 |
0,5400 |
0,5957 |
0,6528 |
0,7112 |
0,7710 |
0,8321 |
|||||||||
|
70 |
0,2324 |
0,3239 |
0,3742 |
0,4256 |
0,4781 |
0,5318 |
0,5868 |
0,6430 |
0,7005 |
0,7593 |
0,8196 |
|||||||||
|
75 |
0,2358 |
0,3192 |
0,3688 |
0,4194 |
0,4712 |
0,5242 |
0,5783 |
0,6337 |
0,6904 |
0,7484 |
0,8078 |
|||||||||
|
80 |
0,2393 |
0,3145 |
0,3634 |
0,4133 |
0,4643 |
0,5165 |
0,5698 |
0,6244 |
0,6803 |
0,7374 |
0,7960 |
|||||||||
|
85 |
0,2428 |
0,3100 |
0,3581 |
0,4073 |
0,4576 |
0,5090 |
0,5616 |
0,6154 |
0,6705 |
0,7268 |
0,7845 |
|||||||||
|
90 |
0,2463 |
0,3056 |
0,3531 |
0,4015 |
0,4511 |
0,5018 |
0,5536 |
0,6067 |
0,6609 |
0,7165 |
0,7734 |
|||||||||
|
95 |
0,2498 |
0,3013 |
0,3481 |
0,3959 |
0,4448 |
0,4948 |
0,5459 |
0,5982 |
0,6517 |
0,7064 |
0,7625 |
|||||||||
